Mavic Open Pro Carbon UST is a lightweight disc brake rim.
They are built up into lightweight but aero wheelset (front and rear) with Carbon Ti X Hub hubs. Sapim CX Ray's spokes and alloy nipples are used
Washers and thread lock ensure nipple breakage wont happen.
This is capable wheelset as well as feeling responsive.
The hubs used are Shimano 8/9/1011 speed, Camapagnolo 9/10/11/12 speed or XDR 12 speed compatible.
100/135mm QR, 100x12/142x12mm and 100x15mm are all supported. Add the configuration required in notes at checkout.
Both hubs are centrelock compatible. Both hubs require an external type rotor lockring for 15mm TA hubs for the front and rear hub, which are listed on this website.
The BORG DX hubs are the all weather offering. They use specially made SKF 6803 bearings (5 rear and 2 front). These provide unparalleled wet weather sealing.
The Carbon Ti hubs use SKF bearings too but the total load capacity is lower. They are very light however and that's there point while still being decently relaible.
The wheelset is built in 24 spoke count front and rear. Higher spokes counts with the BORG DX hubs are possible. Please ask if this is desired.
Weight with the BORG DX hubs is 1480g.
Weight with the Carbon Ti X Hub disc is 1380g
- 25mm deep
- 19mm internal width
- Disc brake only with centrelock rotor mounts
- UST tubeless compatible and supplied tubeless tyre ready.