The BORG45 Disc wheelset uses a 45mm deep and 26mm wide rim. It is stable on windy days and is still deep enough to provide an aerodynamic advantage. It is suitable for disc brake equipped bicycles only. 

The rim is tubeless compatible and is supplied with tubeless tape. Tubed tyres can still be fitted of course. Tubeless valves are also supplied. 

Given the rim has a 19mm internal width the minimum inflated width is 25mm and the rims can accommodate tyres up to 40mm in width. Much wider and the tyres start to light bulb.

The spokes used are Sapim CX Rays with black alloy nipples. If silver brass are desired, please advise when ordering. Spoke count is 24 front and 24 rear. Lacing is 2x. 

Hubs

Bitex BX106 front and BX108 rear are used. Shimano 8/9/10/11/12 speed, Campagnolo 9/10/11/12 speed, Campagnolo N3W 12 speed, Shimano Microspline 12 speed and SRAM XDR 12 speed freehub bodies are offered. Bitex road/gravel hubs use 6902 bearings in the main shell and are well sealed. The freehub has 54 points of engagement. Centrelock rotor mounts are present.

Carbon Ti hubs offer 72 points of engagement and are very light. The hubs offer centrelock rotor mounts and use 6803 and 6903 bearings. They are simple to service, requiring no proprietary tools. available with 

Shimano 8/9/10/11/12 speed, Campagnolo 9/10/11/12 speed, Campagnolo N3W 12 speed, Shimano Microspline 12 speed and SRAM XDR 12 speed freehub bodies.

Available 12mm thru axle (100x12/142x12mm) standards. QR 100/135mm is available for bitex hubs. Bitex hubs support other standards too. If anythting other than 12mm is required please ask. 

If other dropout standards are required, these can be accomodated but for some standards an alternative hub may be needed.

Highlights 

• 45mm deep and 26mm wide
  
• 1500g with bitex hubs or 1400g with Carbon Ti hubs. 
• Shimano, Campagnolo and SRAM freehubs available.
• These wheels are handbuilt to order