Due to lengthening delivery times from Sapim, The Cycle Clinic will  be distributing Pillar Spokes.

Pillar manufacturer excelent spokes from the same wire stock that Sapim use - Scandvik T302 18/8 stainless steel. 

We will be importing triple butted spokes. These offer a better fit in almost all hub which commonly use a 2.5mm dimater spoke hole. Also a thicker elbow -2.2mm - means longer fatigue life for the spoke.

PSR TB2016, PSR TB2017 and PSR TB2018 spokes are on order in silver and black. J bend only.

These spoke have a 1.6mm, 1.7mm or 1.8mm centre section. 2.2mm spoke elbow and 2.0mm after the elbow.

The other spoke we are bring in is the Wing 20 and Wing 21 in J bend and straight pull and  silver and black.

All spokes will be bought as blanks and cut and thread to order in the shop. Pillar use a 30mm barrel so each blank has a 10mm spoke range it can be cut too.