The H Plus Son The Hydra wheelset is very pretty wheelset using a 25mm wide rim that is 23mm deep.
The width of the rim make it suitable for road use and off road CX or gravel road riding. The rim is stiff and feature H Plus Son invisible weld join. There is no strict weight limit but those over 110kg can have a 32 spoke version.
Th rim come in grey or black.
The grey rims just look right with Shimano RS770 hubs or silver Carbon ti hubs and silver Sapim CX-Ray spokes. The drilling is 28H front and rear laced 3x.
The black rims are laced with black sapim CX-ray spokes or the heavier but stiffer triple butted (2.2mm diameter elbow) black Sapim Force spokes and black Miche Syntium DX hubs.
The Miche, Carbon Ti and DT Swiss 350 based wheelset are built 28H but 32H hubs can be built if required.
The Miche hubs are available in 28H or 32H drilling. The have 6 bolt rotor mounts and come with Q/R and kits for 100x12mm/100x15mm front thru axles and 142x12mm rear thru axle. Q/R rear can be swapped in at the shop if you need that then I will supply Q/R skwerers. Add at checkout the axle standard you need. Miche hubs use a 17mm alloy axle for the rear hub and 5 bearings out back too. Shimano (8/9/10/11 speed), Campagnolo (9/10/11 speed) and XD driver (11/12 speed) freehub options.
The RS770 hubs are for centrelock rotors and only and are 32H drilling. they allow 12x100/142x12mm thru axles only and cannot be converted.These are ultegra level hubs and as such are not light but they are reliable is served.
Carbon Ti hubs are very light and reliable hubs from Italy. Available in 28H or 32H drilling with Q/r or 12x100/142x12mm thru axles (at checkout tell me which) and Shimano (8/9/10/11 speed), Campagnolo (9/10/11 speed) and XD driver (11/12 speed) freehub options. The hubs use a 4 pawl freehub mechanism with quick engagement. Carbon Ti Q/R skewers and thru axles can be purchased in separate listings.
Carbon Ti hubs come in anodised black, red, polished silver, matt silver, green, acid green, blue and gold. Again at checkout let me know what colour you want.
The DT Swiss 350 hubs are 28H or 32H drilling and for centrelock rotors. Axle standards can be Q/R, 12x100/142x12mm or others. You will need to add a ote a checkout asking for what you need. DT Swiss hubs are very reliable and use there twin star ratchet freehub mechanism.
Weight with the 32H RS770 hubs and CX-ray spokes is 1730g.
Weight with the 28H Miche hubs and CX-ray spokes is 1640g
Weight with 28H Miche hubs and Force spokes is 1680g
Weight with the Carbon Ti hubs and CX-ray spokes is 1510g
Supplied tubeless ready with tubeless rim tape, tubeless valves and tubeless tyre levers.
5 year/10,000 guarantee against spoke failure, rim failure anything that could be put down to a wheel build problem.